APPLICATIONS:
It is highly recommended for engines such as those fitted on motorcycles, chainsaws, mowers and outboard motors which operate under moderately severe conditions and are lubricated either by oil / gasoline mixtures or by a separate crankcase-cylinder injection system engines with oil injection or premix system.
MIXING INSTRUCTIONS:
Add Rainchem 2T directly to the gasoline in the fuel tank in accordance with the recommendations described in the Operator’s Handbook provided by the engine manufacturer or its equivalent. If this is not available, it can be kept in the mind that an oil / gasoline ratio of 1:25 is technically suitable for the majority of two-stroke engines.
PERFORMANCE FEATURES:
- Suitable for all two-stroke gasoline engines in automotive, industrial and agricultural application.
- Controls excessive exhaust smoke.
- Prevents exhaust port blockage and deposit formation.
- Controls engine wear.
|
TYPICAL PHYSICAL AND CHEMICAL CHARACTERISTICS:
APPEARANCE Clear
COLOR Cherry red
ODOR Strawberry
DENSITY @ 150C, kg./li 0.835 - 0.88
VISCOSITY @ 400C, mm 2/s 25 - 35
FLASH POINT, 0C 190 - 220
WATER SOLUBILITY Non-soluble
PHYSICAL STATE Liquid
HEALTH & SAFETY:
This product does not pose a health or safety hazard when used in the recommended application and when proper industrial safety practices are observes. As with all industrial oils and lubricants, prolonged contact with skin should be avoided, especially with used oils. Wash skin with soap and water after contact. Take used oil to an authorized government accredited recycler. See RAINCHEM 2T MSDS.
PACKAGING :
200 ml. HDPE bottle
20 liter container
200 liter drum
|
